Davis Wheel-A-Weigh Standard Launching Wheels

Wheel-A-Weight transom wheels are an easy way to get your small craft to and from the water quickly and safely. Wheel-A-Weigh is mounted wide on the transom to distribute the load and leave clearance for outboard motors. A detent pin on each pivot bracket lets you position the wheels up or down, or remove them completely for storage. The Wheel-A-Weigh features a 316 stainless steel frame and pivot brackets. It also features precision molded, non-corrosive wheel hubs and 10" inflatable tires. The standard Wheel-A-Weigh has a 220 lbs. capacity and can handle most small boats with motors up to 10 HP.

Note: This product is not designed to be towed behind a vehicle.

Features:

• Portable and removable

• 316 Stainless steel frames and pivot brackets

• Inflatable tires

• Precision molded, non-corrosive wheel hubs

• Stainless steel installation hardware included

• Easy to follow instructions

Specifications:

• 10" Inflatable Tires

• For loads up to 220lbs (100kg)

• Weight: 9lbs 4oz (4.2kg)

Todd Boarding steps Dimensions: 17" H x 23 1/2" W x 26 3/4"D $125.00

Swing back cooler seat measures Seat measures 32”w x 16”d x 20”h base measures 34”w x 16” d $295.00

Edson Radar dome top plate and mounting base fig 975 / B480 $175.00

BROWNELL BOAT STANDS Trailer Lifts, Set of 4 Model # 16687667 Mfg # BLT $ 500

Fortress FX 37 for boats 45’ to 51’ with bag $500

Harken 75mm Carbo Air® Triple Block with Cam Cleat and Becket for controlled easing of a 4:1 or 5:1 purchasing system.  

Low-friction Carbo AirBlocks® are lightweight, strong, reliable—and economical. Consistently 30% lighter and 60% stronger than equivalent Classic blocks. The sideplates are UV-stabilized, high-strength resin and designed for small-diameter lines favored by racers. Good for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats.

Recipient of both the Dame Award and Sail Magazine’s Freeman-Pittman Award for innovation, this innovative line of blocks turns fiber-reinforced composite construction into a reliable strength-to-weight ratio you can depend on. Companions to the popular Harken Black Magic block line, these small, compact blocks work well with very high working loads for easy trimming.

Key Features 

• High strength-to-weight ratio block

• Harken’s most innovative blocks

• 30% lighter, 60% stronger than equivalent conventional blocks

• Smaller block for jib and mainsheet systems on high-performance dinghies 

• Use for high-load control lines on small keelboats

MR Z Bronze Wire rigging Vice for 1/8” to 5/8” $150.00

885 Vacuum Bagging Kit includes all items below. 

Kit includes:

• Venturi Vacuum Generator with Silencer*

• 3 Vacuum Cups, 20′ of ¼” Vacuum Tubing*

• 0-30Hg Vacuum Gauge*

• 2 Junction “T” barbs

• 15 sq ft Release Fabric

• 15 sq ft Breather Fabric

• 15 sq ft Vacuum Bag Film

• 25′ Vacuum Bag Sealant

• Complete, Illustrated Instructions

Wood River Nice Set of 8 Vintage Woodworkers Chisels, 1/4' up to 1-1/2" & Box $90.00

Original Canadian WWII Zinc Webley No 1 Mk V Style Flare Signal Pistol Zinc cast construction with flared barrel smooth two piece walnut grips and lanyard ring on the butt $250

Stidd Helm Chair 12”h x 20”w (between Arm rests) x 21” deep $1000.00

Bronze Porthole 24” overall with 18” glass 4- dog 1-1/4” spigot $500.00

Pair New Cummins Barry mount vibration isolator engine mounts 3349230 $450 pair

British Seagull 4 - 4hp 2 stroke outboard 24” from bracket to cav plate has spark and good compression and shifts . It has not been run in several years $200

Fiberglass Jockey seat console OA 53”l x 14”w ,Base 14”w x 29”l the seat is 14”w x 28” l x19”h - top of guard is 48” Includes nav lights, steering helm with 11’cable wired for VHF.

FYNSPRAY Brass Lever handle Galley Pump $275.00

US Naval Observatory Wilfred O White metal frame Sextant in mahogany case 1942 $400

2005 MERCURY 8HP 4 STROKE SHORT SHAFT TILLER SUPER LOW HOURS ( 10 ) $1200

Optimist Sailing dinghy complete $800.00